Intel D201GLY2A (with integrated Celeron 1.2Ghz CPU)

PRODUCT IS CURRENTLY NOT AVAILABLE !

Intel D201GLY2<b>A</b> (with integrated Celeron 1.2Ghz CPU)

Intel Rapid BIOS Boot
DDR-II RAM
1.2Ghz CPU
SATA !

CPU	Intel Celeron 220 1.2Ghz
Graphics	SiS Mirage
Formfactor	ITX (17x17cm)
RAM	1x DDR-II 400/533/677
Audio	ADI* AD1888 audio codec
Base	Intel ITX

USB	6x USB 2.0
Firewire	--
IDE/SATA	1x IDE, 2x SATA
LAN	1x 10/100
Parallel	1x
Serial	1x

no	TV-Out
yes	PCI
no	Mini-PCI
yes	IDE
no	DVI
no	800x480 Resolution

no	Passive-Cooling
no	PCI-Express
no	PCMCIA
yes	SATA
no	CPU changeable
no	Compact Flash

Note : Mainboard is like Intel D201GLY2, but with fan !

The Intel® Desktop Board D201GLY2A is an innovative solution for the sub-value market segment. With an Intel® Celeron® processor and graphics integrated on the board, this board enables easy system integration and helps you to achieve a lower system cost. This board has 10/100 LAN, support up to six Hi-Speed USB 2.0 ports and 2 SATA (1.5 GB/s), providing both connectivity and ease of use for your computing needs such as email and Internet access, instant messaging and Voice Over IP (VoIP).

The Intel Desktop Board D201GLY2A is built in smaller uATX-Compatible form factor providing lower power consumption and passive thermal solution.

Note : The CPU heatsink has a height of 45mm. Thats why it does not fit into every enclosure.
Compatible with :
- Voom
- Voom-2
- M300(-LCD)
- Travla C137
Not compatible with :
- M200(-LCD) (needs replacement heatsink)
- Morex enclosures (needs replacement heatsink)

PicoPSU & M3-ATX : You can only directly stick in the standard picoPSU-120 power supply. Other picoPSU models and M3-ATX can only be connected with an additional ATX extension cable.

For Operating you need a P4 adapter or a PSU with P4 connector

Form Factor	uATX (6.75 inches by 6.75 inches [171.45 millimeters by 171.45 millimeters]) (ITX compatible)
Processor	Integrated Intel® Celeron® 220 processor (1.2 Ghz) with a 533 MHz system bus
Memory	One 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets Support for DDR2 677/533/400 MHz DIMMs Support for up to 1 GB of system memory
Chipset	SiS* SiS662 Northbridge SiS* SiS964L Southbridge
Audio	ADI* AD1888 audio codec
Video	Integrated SiS Mirage* 1 graphic engine
I/O Control	Winbond* W83627DHG-B based Legacy I/O controller for hardware management, serial, parallel, and PS/2* ports
LAN Support	10/100 Mbits/sec LAN subsystem using the Broadcom* LAN adapter device
Peripheral Interfaces	Six USB 2.0 ports One parallel ATA IDE interface with UDMA 33, ATA-66/100/133 support Two SATA ports One serial port One parallel port PS/2* keyboard and mouse ports
Expansion Capabilities	One PCI Conventional* bus connector

Data sheet	Download (PDF)
Data sheet	Print view

Please login for creating product ratings.

Your rating:

Please tell us your opinion. Rate the product on a scale from 1 to 5. A value of 5 means the best possible rating. If you want you also can leave a comment.

Your ratings are honored on many ways. Your report will help other customers to better judge about the products. And you can benefit from reports other customers are giving.

In addition we credit 0.50 EUR for each given rating with comment and 1.00 EUR for each given rating with comment (more than 150 characters) on your account. The credit will be substracted automatically on your next order !

We reserve us the right to delete given comments (for example on attempts to give comments with senseless content, copying of other comments, inserting of foreign content, abusing the system for financing orders). "Fair-use-policy" does apply (as of rule of thumb you should give comments for products which you have purchased already. And your credit account only in rare cases will have 2 or even 3 digits). The credit can only be withdrawn by placing an order. It is not possible to get the credit cash or transferred in an other way.

Customer ratings: Average rating, based on 26 ratings

from b.pereira am 11.05.2008 | See all my comments

Comes with Celeron 1.2Gh CPU nice product.

from Neo85 am 04.05.2008 |

| See all my comments

Das Mainboard ist vom Preis-Leistungsverhältnis ideal.
Das Board läufe jetzt schon seit ein paar Wochen in meinem Auto und Probleme sind bisher noch keine aufgetreten.
Fazit: Erstklassiges Board für weing Geld.

Update from :2008-05-04 08:26
Das Mainboard ist vom Preis-Leistungsverhältnis ideal.
Das Board läufe jetzt schon seit ein paar Wochen in meinem Auto und Probleme sind bisher noch keine aufgetreten.
Fazit: Erstklassiges Board für weing Geld.

from hmkj am 02.05.2008

Since some day i was looking for a cheap mainboard with integrated cpu and i find this product. i am very happy of my choice

Update from :2008-05-02 06:49
c'est un tres bon produit pour debut un pccar mais cependant il faut pas trop le forcé c'est comment meme que 1.2ghz et pas un dual core a 3ghz. j'ai pris aussi une alime m4-atx car j'ai mis aussi un lecteur dvd

from WowaZG am 06.04.2008

Sowet bin ich ganz zufrieden, aber es will nicht mit meinem S-Ata zu CF-Card adapter laufen. Sobald das Teil eignesteckt wird bootet das system nicht mehr, egal ob mit oder ohne Karte! Im Bios wird es richtig erkannt. Bios update wurde auch gemacht hat nichts geholfen!

Kingston Ram sollte nicht verwendet werden jedenfalls nicht der KVR533D2N4