CALU-M2C-DVI - P4-M Car-PC Barebone (with Autostart-controller, car-adapter) --DualChannel (DVI+DSUB)-- PCMCIA *new*
[http://www.cartft.com/catalog/il/630]
  429.00 EUR
incl. 19% VAT, plus shipping

  • For Celeron-M/Pentium-M
  • Integr. Automotive PSU
  • Dualchannel VGA
  • PCMCIA
Support: Assembling Tutorial [DE] | Assembling Tutorial [EN] | Dual-Out-HowTo [EN]

The CALU-M(2)C-Series has an integrated car-power supply (direct connectable to car battery and ignition plus + integrated automatic Start/Stop-Controller.

The time intervals for automatic Start and Stop can be adjusted in the BIOS of the PC !
As an additional highlight this barebone offers a PCMCIA slot.

CALU specifications

Processor (supported)

Intel Pentium M processor or Celeron M processor (Dothan or Banias) 1.3GHz or higher

Memory

Supports DDR 400/333/266 DIMM RAM
0.8" low profile
2x memory slots !
Maximum : 2 GB

Video

Intel Extreme Graphics 2
Supports up to 64MB DVMT video memory

Audio

Software AC '97 Audio CODEC

Peripheral Connection

Front :
1 x PCMCIA Slot
1 x IEEE 1394 Firewire port
1 x MIC Port
1 x Ear Phone output Jack
Power-on button
Reset button
Power-on and HDD LED

Rear :
1 x RS232 COM port
1 x RJ45 10/100Mb Fast Ethernet
1 x Line-Out output Jack
2 x USB 2.0 / 1.1 Ports
1 x 15 pin VGA
1 x DVI

Storage

One 2.5 inch Hard Disk and 9.5mm high.
(Support Ultra DMA 33/66/100).

Weight & Size System approximately 3kg (fully equipped).
System Dimension: 155 x 255 x 55 mm
Power req. 9-16V, 5A
Accessory
Storage

Supports all 2.5" standard IDE hard drive, ATA-100/66/33.

Scope of supply

Connector cable for Plus, ignition plus and ground
Barebone
CPU Kühlkörper



Installation Tutorial : Support / Manuals

Graphics driver for 800x480 resolution : Here