Mitac PD10AI-N3350 (Intel DN2800MT4) Half-Height (Intel Apollo Lake N3350 2x2.4Ghz CPU, 8-24VDC) [FANLESS]

  169.95 EUR
incl. 19% VAT, plus shipping

  • Intel Apollo Lake !
  • 2x 1.86Ghz !
  • 2x RS232 !
  • DVI !
Support: Specifications

This board is produced by MITAC, the OEM producer of Intel DN2800MT. This board is based on Intel DN2800MT, but is equipped with the moderm Intel Apollo Lake plattform. PD10RI is available until at least 2025.

Form Factor Low-profile Mini-ITX (20 millimeters [0.79 inches] x 170.18 millimeters [6.7 inches] x 170.18 millimeters [6.7 inches])
Processor Chipset Intel Braswell N3350 Processor with integrated graphics
  • Support for dual channel DDR3L 1867 SO-DIMMs
  • Support for up to 8 GB of system memory on a single SO-DIMM (or 4 GB each by 2 SO-DIMM)
  • 204-pin DDR3L SO-DIMM
  • Integrated graphics:
  • Digital displays (HD-Out)
  • Internal flat panel displays:
  • LVDS
  • Embedded DisplayPort* eDP*
  • External graphics support via a PCI Express 2.0 x1 graphics add-in card connector
  • 2 + 2 Channel High Definition Audio ( HD Audio) using a Realtek* ALC283 audio codec supporting:
  • Analog stereo line-out (back panel jack)
  • In-chassis stereo speakers support (3 W/3 Ω via an internal header)
Expansion Capability
  • PCI Express x1 add-in card connector
  • M.2 (2242/2260/2280) with USB2.0 and SATA III signal for SSD
  • M.2 (2230) with PCIex1 and USB2.0 signal for wireless
Peripheral Interfaces
  • USB 2.0 front panel ports
2 (Header)
  • USB 3.0 back panel connectors (blue)
  • SATA 6.0 Gb/s
  • SATA 6.0 Gb/s port (multiplexed with an m.2 slot)
Legacy I/O
  • Legacy I/O Controller that provides:
  • Serial port header
  • Parallel port via an onboard header (Option with MiAPI header)
LAN Support 2x Intel I211-AT (10/100/1000 Mb/s) Ethernet LAN controller
  • BIOS resident in a Serial Peripheral Interface (SPI) Flash device
  • Support for Advanced Configuration and Power Interface (ACPI), and System Management BIOS (SMBIOS)
Hardware Management Nuvoton NCT6793Dbased subsystem, including:
  • Voltage sense to detect out of range power supply voltages
  • Thermal sense to detect out of range thermal values
  • 2x 4-pin system fan header
Power Requirement
  • DC connectivity via back-panel DC jack(2.5mm/ ID, 5.5mm/ OD)
  • Internal 2 pin power connector
  • Operating Temperature: 0C to +60C
  • Storage Temperature: -20C to +70C
  • CE
  • FCC